Aesthetic effect evaluation of the xenogeneic collagen matrix in keratinized mucosa augmentation around dental implants / 口腔疾病防治

Objective@#To evaluate the stability and aesthetic effect of a xenogeneic collagen matrix (mucograft) on achieving an adequate keratinized mucosa width (KMW) around implants and to provide a reference basis for the clinical application of xenogeneic collagen matrix materials.@*Methods@#The hospital ethics committee approved the study protocol, and the patients provided informed consent. Twenty patients with a KMW<2 mm at the buccal implant site who were treated in Binzhou Medical University Affiliated Yantai Stomatological Hospital from July 2020 to September 2022 were included, and a total of 36 implants were included. The mean age of the patients was (52.0±10.4) years, of which 18 were females and 2 were males. They were divided into a free gingival graft group (FGG, control group) and a xenogeneic collagen matrix group (test group) according to different graft materials. The incremental effect of the KMW on the buccal side of the implant and the mucosal shrinkage rate was measured at 1 month and 3 months after the operation. The mucosal scar index (MSI) was evaluated after the operation.@*Results@#At 3 months postoperatively, the KMW was (3.67 ± 1.06) mm in the control group and (2.96 ± 0.98) mm in the test group, and the difference was statistically significant (t = 2.076, P<0.05). The KMW shrinkage rate was (33.34 ± 16.30) % in the test group and (22.05 ± 15.47) % in the control group at 1 month postoperatively and (51.95 ± 12.60) % in the test group and (37.44 ± 16.30) % in the control group at 3 months postoperatively, with statistically significant differences between the two groups at the same time points (P<0.05). Three months after surgery, the test group showed significantly better outcomes than the control group in terms of the five scar indicators (scar width, scar convexity, scar color, scar trace, and overall appearance), and the difference was statistically significant (P<0.05).@*Conclusion@#Xenogeneic collagen matrix can increase the peri-implant KMW and achieve a more natural and coordinated soft tissue aesthetic effect but with a higher shrinkage rate.

Effect of elastomeric urethane monomer on physicochemical properties and shrinkage stress of resin composites

Abstract This study aimed to evaluate the effect of an elastomeric urethane monomer (Exothane-24) in different concentrations on physicochemical properties, gap formation, and polymerization shrinkage stress of experimental resin composites. All experimental composites were prepared with 50 wt.% of Bis-GMA and 50 wt.% of TEGDMA, to which 0 wt.% (control), 10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.% of Exothane-24 were added. Filler particles (65 wt.%) were then added to these resin matrixes. Ultimate tensile strength (UTS: n = 10), flexural strength (FS: n = 10), flexural modulus (FM: n = 10), hardness (H: n = 10), hardness reduction (HR: n = 10), degree of conversion (DC: n = 5), gap width (GW: n = 10), and polymerization shrinkage stress in Class I (SS-I: n = 10) and Class II (SS-II: n = 10) simulated configuration. All test data were analyzed using one-way ANOVA and Tukey's test (α = 0.05; β= 0.2). Exothane-24 in all concentrations decreased the H, HR, DC, GW, SS-I, and SS-II (p < 0.05) without affecting the UTS, and FS (p > 0.05). Reduction in FM was observed only in the Exothane 40% and 30% groups compared to the control (p < 0.05). Exothane-24 at concentrations 20% and 30% seems suitable since it reduced GW and polymerization SS without affecting the properties of the composite resins tested, except for H.

Resumo Este estudo teve como objetivo avaliar o efeito de um monômero elastomérico de uretano (Exothane-24) em diferentes concentrações em propriedades físico-químicas, formação de fenda e tensão de contração de polimerização de resinas compostas experimentais. Todos os compósitos experimentais foram preparados com 50% em peso de Bis-GMA e 50% em peso de TEGDMA, nos quais 0% (controle), 10%, 20%, 30% e 40% em peso de Exothane-24 foram adicionados. Partículas de carga (65% em peso) foram então adicionadas as matrizes resinosas. Resistência coesiva (RC: n = 10), resistência à flexão (RF: n = 10), módulo de flexão (MF: n = 10), dureza (D: n = 10), redução de dureza (RD: n = 10), grau de conversão (GC: n = 5), largura de fenda (LF: n = 10) e tensão de contração de polimerização em simulações de cavidades Classe I (TC-I: n = 10) e Classe II (TC-II: n = 10). Todos os dados do teste foram analisados usando one-way ANOVA e teste de Tukey (α = 0,05; β = 0,2). O Exothane-24 em todas as concentrações diminuiu a D, RD, GC, LF, TC-I e TC-II (p < 0,05) sem afetar o RC e RF (p > 0,05). A redução da MF foi observada apenas nos grupos Exothane 40% e 30% em relação ao controle (p < 0,05). O Exothane-24 nas concentrações de 20% e 30% pareceu ser adequado, pois reduziu LF e TC de polimerização sem afetar as propriedades das resinas compostas testadas, exceto para D.

Construction of a prognostic model for hepatocellular carcinoma based on pyroptosis-related genes / 中华肝脏病杂志

Objective: To study the construction of a prognostic model for hepatocellular carcinoma (HCC) based on pyroptosis-related genes (PRGs). Methods: HCC patient datasets were obtained from the Cancer Genome Atlas (TCGA) database, and a prognostic model was constructed by applying univariate Cox and least absolute shrinkages and selection operator (LASSO) regression analysis. According to the median risk score, HCC patients in the TCGA dataset were divided into high-risk and low-risk groups. Kaplan-Meier survival analysis, receiver operating characteristic (ROC) curves, univariate and multivariate Cox analysis, and nomograms were used to evaluate the predictive ability of the prognostic models. Functional enrichment analysis and immune infiltration analysis were performed on differentially expressed genes between the two groups. Finally, two HCC datasets (GSE76427 and GSE54236) from the Gene Expression Omnibus database were used to externally validate the prognostic value of the model. Univariate and multivariate Cox regression analysis or Wilcoxon tests were performed on the data. Results: A total of 366 HCC patients were included after screening the HCC patient dataset obtained from the TCGA database. A prognostic model related to HCC was established using univariate Cox regression analysis, LASSO regression analysis, and seven genes (CASP8, GPX4, GSDME, NLRC4, NLRP6, NOD2, and SCAF11). 366 cases were evenly divided into high-risk and low-risk groups based on the median risk score. Kaplan-Meier survival analysis showed that there were statistically significant differences in the survival time between patients in the high-risk and low-risk groups in the TCGA, GSE76427, and GSE54236 datasets (median overall survival time was 1 149 d vs. 2 131 d, 4.8 years vs. 6.3 years, and 20 months vs. 28 months, with P = 0.000 8, 0.034 0, and 0.0018, respectively). ROC curves showed good survival predictive value in both the TCGA dataset and two externally validated datasets. The areas under the ROC curves of 1, 2, and 3 years were 0.719, 0.65, and 0.657, respectively. Multivariate Cox regression analysis showed that the risk score of the prognostic model was an independent predictor of overall survival time in HCC patients. The risk model score accurately predicted the survival probability of HCC patients according to the established nomogram. Functional enrichment analysis and immune infiltration analysis showed that the immune status of the high-risk group was significantly decreased. Conclusion: The prognostic model constructed in this study based on seven PRGs accurately predicts the prognosis of HCC patients.

Construction of predictive model for pregnancy-related anxiety risk in pregnant women based on LASSO regression / 环境与职业医学

Background Pregnancy-related anxiety has a negative impact on the physical and mental health of pregnant women and the normal growth and development of the fetus. Establishing prediction models for pregnancy-related anxiety to screen associated predictive factors may provide important opportunities for prenatal intervention. Objective To establish a prediction model of pregnancy-related anxiety risk of pregnant women. Methods From January to July 2021, a questionnaire survey on pregnancy-related anxiety and predictors was conducted among pregnant women having routine prenatal check-ups provided by an obstetrics clinic of a tertiary grade A hospital in Ningxia. The socio-demographic characteristics of the subjects were collected, and the pregnant women were evaluated by the Life Event Scale (LES), Perceived Social Support Scale (PSSS), Family APGAR Index (APGAR), and Pregnancy-related Anxiety Questionnaire (PAQ). R 4.2.0 software was used to fit all selected variables by least absolute shrinkage and selection operator (LASSO) regression to identify predictors of pregnancy-related anxiety in the second and third trimesters. On the basis of logistic regression analysis, prediction models of pregnancy-related anxiety in the second and third trimesters were constructed, and the model nomogram and receiver operating characteristic curve (ROC) were drawn. The prediction effect of the model was evaluated by area under the curve (AUC). A calibration chart was drawn to evaluate the calibration of the model. Results A total of 1500 questionnaires were distributed, and 1448 valid questionnaires were recovered, with an effective rate of 96.53%. Among the 1448 pregnant women, the overall positive rate of pregnancy-related anxiety was 28.80% (417/1448), and the positive rates in the second and third trimesters were 29.21% (276/935) and 27.49% (141/513), respectively. The predictors entering the the second trimester model were age of marriage, family care, social support, family expectations for the fetus, physical condition during pregnancy, and whether experiencing life stressful events during pregnancy. The predictors entering the the third trimester model were pregnancy intention, physical discomfort, and whether experiencing life stress during pregnancy. A risk prediction model of pregnancy-related anxiety for the second trimester was established: risk of pregnancy-related anxiety=−0.07× marriage age +0.12× family care −0.03× social support −0.65× family expectation of fetal sex +0.42× physical condition during pregnancy +0.47× whether experiencing life stressful events during pregnancy. A risk prediction model of pregnancy-related anxiety for the third trimester was established: risk of pregnancy-related anxiety=−5.69+0.82× pregnancy intention +1.06× physical discomfort +0.94× whether experiencing life stressful events during pregnancy. The ROC curves of the two models were drawn. The AUC of the second trimester model was 0.71, and the AUC of related validation model was 0.68. The AUC of the third trimester model was 0.72, and the AUC of related validation model was 0.66. Conclusion The risk prediction models of pregnancy-related anxiety constructed based on LASSO regression and logistic regression have good prediction ability, and they suggest that pregnant women in the second trimester with short marriage age, high family care, low social support, family expectations for fetal sex, average physical condition, and experiencing life stress during pregnancy, and pregnant women in the third trimester with spontaneous pregnant intention, unintended pregnancy, physical discomfort, and experiencing life stress during pregnancy are high-risk groups for pregnancy-related anxiety.

Effects of thermal cycling on bonding properties of novel low-shrinkage resin adhesive / 华西口腔医学杂志

OBJECTIVES@#The current study aimed to investigate the bonding properties of a novel low-shrinkage resin adhesive containing expanding monomer and epoxy resin monomer after thermal cycling aging treatment.@*METHODS@#Expanding monomer of 3,9-diethyl-3,9-dimethylol-1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU) as an anti-shrinkage additive and unsaturated epoxy monomer of diallyl bisphenol A diglycidyl ether (DBDE) as a coupling agent were synthesized. A blend of DDTU and DBDE at a mass ratio of 1∶1, referred to as "UE", was added into the resin matrix at the mass fraction of 20% to prepare a novel low-shrinkage resin adhesive.Then, the methacrylate resin adhesive without UE was used as the blank control group, and a commercial resin adhesive system was selected as the commercial control group. Moreover, the resin-dentin bonding and micro-leakage testing specimens were prepared for the thermal cycling aging treatment. The bonding strength was tested, the fracture modes were calculated, the bonding fracture surface was observed by scanning electron microscope (SEM), and the dye penetration was used to evaluate the tooth-restoration marginal interface micro-leakage. All the data were analyzed statistically.@*RESULTS@#After aging, the dentin bonding strength of the experimental group was (19.20±1.03) MPa without a significant decrease (P>0.05), that of the blank control group was (11.22±1.48) MPa with a significant decrease (P<0.05) and that of the commercial control group was (19.16±1.68) MPa without a significant decrease (P>0.05). The interface fracture was observed as the main fracture mode in each group after thermal cycling by SEM. The fractured bonding surfaces of the experimental group often occurred on the top of the hybrid layer, whereas those of the blank and commercial control groups mostly occurred on the bottom of the hybrid layer. Micro-leakage rating counts of specimens before and after thermal cycling were as follows: the experimental group was primarily 0 grade, thereby indicating that a relatively ideal marginal sealing effect could be achieved (P>0.05); meanwhile, the blank control group was primarily 1 grade, and the penetration depth of dye significantly increased after thermal cycling (P<0.05); the commercial control group was primarily 0 grade without statistical difference before and after thermal cycling (P>0.05), while a significant difference was observed between the commercial control group and experimental group after thermal cycling (P<0.05).@*CONCLUSIONS@#The novel low-shrinkage resin adhesive containing 20%UE exhibited excellent bonding properties even after thermal cycling aging treatment, thereby showing a promising prospect for dental application.

A comparative evaluation of gingival microleakage and internal voids in Class II composite restoration with two different lining techniques An in vitro study

Aim: The aim of this study was to evaluate the gingival microleakage and internal voids in Class II composite restoration restored with precure and co-cure lining techniques using stereomicroscopic method. Materials and Methods: Forty-five freshly extracted permanent multirooted human molar teeth were collected and used in the study. After surface debridement and scaling of all teeth, standard Class II mesio-occlusal cavities were prepared. Forty-five samples were randomly divided into three experimental groups (n = 15), and filled according to manufacturer's instructions. Group I was precure group, Group II was co-cure group, and Group III was only bulk fill. The finishing and polishing of the restorations was done after 24 h. Then, all the specimens were subjected to thermocycling for 500 cycles. The gingival microleakage and internal voids of all the groups were evaluated using dye penetration method. Samples were then sectioned and examined under the stereomicroscope at ×40. Readings obtained were subjected to statistical analysis using SPSS ver 20.0 (IBM Corp, ARMONK USA) and Chi-square test. Results: The statistical analysis revealed that extent of microleakage was maximum in Group II (co-cure), followed by Group III (only bulk fill) and Group I (precure). The gingival voids were maximum in Group III (only bulk fill), minimum in Group II (co-cure), and least in Group I (precure). The cervical voids were maximum in Group II (co-cure) and Group III (only bulk fill), followed by Group I (precure). The occlusal voids were maximum in Group II (co-cure) and similar in Group I (precure) and Group III (only bulk fill). Conclusion: The precure lining technique was better than co-cure lining technique in terms of both microleakage and internal voids.

Plastination with low viscosity silicone: strategy for less tissue shrinkage

Plastination is an anatomical technique for preserving biological tissues based on the principle of replacing body fluids with a curable polymer. An inconvenient aspect of this technique is the tissue shrinkage it causes; several studies seek ways to reduce or avoid this shrinkage. Additionally, there are no studies in the literature that quantitatively evaluate the use of low viscosity silicones in plastination having shrinkage of tissue as a parameter. Therefore, this study aimed to evaluate the use of Silicones S10 (Biodur) and P1 (Polisil) in the plastination of different types of biological tissues of a sliced human body, having as a parameter the tissue shrinkage caused in the forced impregnation stage. Human cardiac, pulmonary, splenic, renal, hepatic, muscular, and bone tissues were analyzed. For such purpose, a male human body was used, sliced in 13-15-mm-thick pieces, having as a parameter the before and the after plastination with the different silicones. The standard protocol of the plastination of the slices was followed: dehydration, forced impregnation, and curation. Half of the pieces obtained were plastinated with silicone P1 (group P1) and the other half with S10 (group S10). All tissues and anatomical segments analyzed in this study showed less or equal shrinkage when plastination of the control group (S10) was compared with that of the P1 group. Therefore, we concluded that the lower viscosity silicone promoted less tissue shrinkage, making it a viable alternative to the reference.

The novel ER stress inducer Sec C triggers apoptosis by sulfating ER cysteine residues and degrading YAP via ER stress in pancreatic cancer cells

Pancreatic adenocarcinoma (PAAD) is one of the most lethal malignancies. Although gemcitabine (GEM) is a standard treatment for PAAD, resistance limits its application and therapy. Secoemestrin C (Sec C) is a natural compound from the endophytic fungus Emericella, and its anticancer activity has not been investigated since it was isolated. Our research is the first to indicate that Sec C is a broad-spectrum anticancer agent and could exhibit potently similar anticancer activity both in GEM-resistant and GEM-sensitive PAAD cells. Interestingly, Sec C exerted a rapid growth-inhibiting effect (80% death at 6 h), which might be beneficial for patients who need rapid tumor shrinkage before surgery. Liquid chromatography/mass spectrometry and N-acetyl-l-cysteine (NAC) reverse assays show that Sec C sulfates cysteines to disrupt disulfide-bonds formation in endoplasmic reticulum (ER) proteins to cause protein misfolding, leading to ER stress and disorder of lipid biosynthesis. Microarray data and subsequent assays show that ER stress-mediated ER-associated degradation (ERAD) ubiquitinates and downregulates YAP to enhance ER stress via destruction complex (YAP-Axin-GSK-βTrCP), which also elucidates a unique degrading style for YAP. Potent anticancer activity in GEM-resistant cells and low toxicity make Sec C a promising anti-PAAD candidate.

Knowledge about composite restorations repair vs replacement- a survey among a subpopulation of saudi dental students / Conhecimento sobre reparo e substituição de restaurações de resina - uma pesquisa entre uma subpopulação de estudantes sauditas de odontologia

Objective: The purpose of this study was to evaluate the knowledge among dental students at King Khalid University, Jazan University, and Najran University in the kingdom of Saudi Arabia about when to repair or replace defective direct composite restoration. Materials and Methods: A questionnaire-based survey was formulated, pursuing the information about management (repair/replacement) of defective composite restorations and distributed among 200 dental students of three universities in the southern region of the kingdom of Saudi Arabia. The data were collected with the help of an online questionnaire. Data entry and the analysis were done using the statistical software package SPSS version 20.0. It was presented using descriptive statistics in the form of frequencies and percentages for qualitative variables, and range means and standard deviations for age, quantitative variable. Analytic statistics were done using Chi-Square tests (χ2) to test the significant difference between categorical variables. The level of significance, the p-value was 0.01(p<0.01). Results: The decision to choose between composite repair or replacement was influenced by whether this topic was taught to them at various undergraduate levels during Bachelor of Dental Surgery. The reason associated with the decision to repair defective composite restorations, 76% reported as cost-effective followed by Increased longevity (71%), the permanent filling (70%), patient's preference for repair (65%), and least time consuming (50%). 67% participants preferred significantly (p<0.001) repair due to secondary caries in the previously restored tooth with composite, followed by the small surface defect in a composite restoration (65%), risk of pulpal damage significantly (p<0.001) in a defective composite restoration (62.5%) and more invasive and destructive treatment option (35%). More than half of respondents 123 (61.5%) reported that they were not taught about composite repair during the Bachelor of Dental Surgery. Conclusion: It is suggested with the help of our study that didactic and clinical training components regarding composite repair should be seriously included in the teaching curriculum of dental institutions as it is in the best interest of the patient. Dental students should be provided with clinical training on this topic so that they can follow proper decision-making protocols available during repair or replacement of defective resin composite restorations. Other researches in the future can be carried out for refining the guidelines and techniques utilized for composite repair. (AU)

Objetivo: O objetivo deste estudo foi avaliar o conhecimento entre estudantes de odontologia da King Khalid University, Jazan University e Najran University, no reino da Arábia Saudita, sobre quando reparar ou substituir restaurações de resina composta direta defeituosas. Material e Métodos: Foi formulada uma pesquisa baseada em questionário, buscando informações sobre o manejo (reparo / substituição) de restaurações de resina composta e distribuída entre 200 estudantes de odontologia de três universidades da região sul do reino da Arábia Saudita. Os dados foram coletados com o auxílio de um questionário online. A entrada e análise dos dados foram feitas com o software estatístico SPSS versão 20.0. Foi apresentado por meio de estatística descritiva na forma de frequências e percentuais para as variáveis qualitativas, e amplitude de médias e desvios-padrão para a idade, variável quantitativa. A estatística analítica foi feita usando testes de qui-quadrado (χ2) para testar a diferença significativa entre as variáveis categóricas. Ao nível de significância, o valor de p foi de 0,01 (p <0,01). Resultados: A decisão de escolher entre o reparo ou substituição do compósito foi influenciada pelo fato de este tópico ter sido ensinado a eles em vários níveis de graduação durante o Bacharelado em Odontologia. O motivo associado à decisão de reparar restaurações de resina composta defeituosas, 76% relataram como custo-benefício seguido por maior longevidade (71%), restauração definitva (70%), preferência do paciente para reparo (65%) e menos demorado ( 50%). Sessenta e sete por cento dos participantes preferiram o reparo significativamente (p <0,001) devido a cárie secundária no dente previamente restaurado com resina composta, seguido pelo pequeno defeito de superfície em uma restauração composta (65%), risco de dano pulpar significativamente (p <0,001) em um restauração de resina composta com defeito (62,5%) e opção de tratamento mais invasiva e destrutiva (35%). Mais da metade dos entrevistados, 123 (61,5%) relataram que não foram ensinados sobre reparo de resina composta durante o Bacharelado em Odonotlogia. Conclusão: É sugerido com a ajuda de nosso estudo que os componentes do treinamento didático e clínico sobre reparo de resina composta devem ser seriamente incluídos no currículo de ensino de instituições odontológicas, pois é do interesse do paciente. Os estudantes de odontologia devem receber treinamento clínico sobre este tópico para que possam seguir os protocolos de tomada de decisão adequados disponíveis durante o reparo ou substituição de restaurações de resina composta com defeito. Outras pesquisas no futuro podem ser realizadas para refinar as diretrizes e técnicas utilizadas para reparo de resina (AU)

Ultrasonic classification and evolution of thyroid shrinking nodules / 中华超声影像学杂志

Objective:To investigate the ultrasonographic features and evolution of thyroid shrinking nodules in order to improve the differential diagnosis and management strategy and avoid unnecessary biopsy.Methods:A total of 245 patients with old bleeding of benign thyroid nodules diagnosed via fine needle aspiration cytology (FNAC) from May 2015 to July 2020 in the southern part of the Shanghai General Hospital Affiliated to the Medical College of Shanghai Jiaotong University, including 263 nodules. The sonographic parameters such as size, shape, aspect ratio, echo, edge, boundary, periphery, halo, calcification, posterior echo enhancement and posterior acoustic attenuation of nodules were analyzed retrospectively, and the ultrasonic appearances of nodules were classified; 41 nodules from 40 patients, who did ultrasound examinations more than twice and had both complete ultrasonographic data, were compared and then classified in order to explore the evolution rules of the nodules.Results:Two hundred and sixty-three thyroid shrinking nodules in 245 cases were classified into 4 types: "cystic wall shrinkage sign" type(71.48%, 188/263), "carcinoma-like" type (22.05%, 58/263), "inflammation-like" type(3.04%, 8/263) and "undefined atypical solid nodules" type(3.42%, 9/263). Of the 41 consecutive follow-up nodules, 37 cases showed obvious cystic wall shrinkage sign, and 7 of them developed into "carcinoma-like" type and 6 cases into "inflammation-like" type.Conclusions:The ultrasonographic appearance of thyroid shrinking nodules is a dynamic process, which can be divided into 4 types: "cystic wall shrinkage sign" , "carcinoma-like" , "inflammation-like" and "undefined atypical solid nodules" types. The "cystic wall shrinkage sign" type is typical and common. The "cystic wall shrinkage sign" type can develope into the "carcinoma-like" type or the "inflammation-like" type.

A logistic regression model for prediction of glioma grading based on radiomics / 中南大学学报(医学版)

OBJECTIVES@#Glioma is the most common intracranial primary tumor in central nervous system. Glioma grading possesses important guiding significance for the selection of clinical treatment and follow-up plan, and the assessment of prognosis. This study aims to explore the feasibility of logistic regression model based on radiomics to predict glioma grading.@*METHODS@#Retrospective analysis was performed on 146 glioma patients with confirmed pathological diagnosis from January, 2012 to December, 2018. A total of 41 radiomics features were extracted from contrast-enhanced T@*RESULTS@#A total of 5 imaging features selected by LASSO were used to establish a logistic regression model for predicting glioma grading. The model showed good discrimination with AUC value of 0.919. Hosmer-Lemeshow test showed no significant difference between the calibration curve and the ideal curve (@*CONCLUSIONS@#The logistic regression model using radiomics exhibits a relatively high accuracy for predicting glioma grading, which may serve as a complementary tool for preoperative prediction of giloma grading.

Research progress on the antibacterial properties of dental resin materials / 口腔疾病防治

@#Dental resin materials have been widely used in the treatment of dental defects. However, the polymerization shrinkage of the resin materials tends to cause microleakage and accumulation of bacterial plaque, which leads to secondary dental caries. Endowing dental resin with antibacterial properties is an important way to solve this problem. Adding antibacterial agents to dental resin is the main method to give it antibacterial properties. Antimicrobial agents are mainly divided into three types: release type, non-release type and mixed type. In terms of antibacterial effects, the selection and addition of antibacterial agents will affect the antibacterial and mechanical properties of dental resin materials; and the long-term antibacterial effect of antimicrobial agents in the oral cavity remains to be verified; as antimicrobial agents or other environmental factors can lead to drug resistance and even dormant persistent bacteria. In recent years, researchers have been committed to improving the antibacterial effect by modifying antibacterial agents. The sustained release of antimicrobial agents via carriers is also the main research direction. This paper reviews the research progress on the antibacterial properties of dental resin materials.

Statistical analysis of shrinkage levels of human brain slices preserved by sheet plastination technique with polyester resin / Análisis estadístico de los niveles de retracción de cortes de cerebro humano conservados mediante la técnica de plastinación de cortes con resina poliéster

Plastination is currently the most important anatomical preservation technique due to the possibility of preserving bodies and organs for an indefinite period, in a dry and biosecure form, while preserving the morphological characteristics of the tissues. However, the shrinkage of the samples is also part of the plastination, perhaps becoming one of its few disadvantages. This paper presents the shrinkage caused by the classic technique of sheet plastination with polyester resin (Biodur® P40) in human brain slices, with the aim of statistically establishing the percentages of tissue shrinkage caused by this plastination protocol.

La plastinación es actualmente la técnica de preservación anatómica más importante debido a la posibilidad de preservar los cuerpos y órganos por un período indefinido, en forma seca y biosegura, al tiempo que preserva las características morfológicas de los tejidos. Sin embargo, la retracción de las muestras también es parte de la plastinación, quizás convirtiéndose en una de sus pocas desventajas. Este artículo presenta la retracción causada por la técnica clásica de plastinación de cortes con resina poliéster (Biodur® P40) en cortes de cerebro humano, con el objetivo de establecer estadísticamente los porcentajes de retracción de tejidos causados por este protocolo de plastinación.

Tumor shrinkage rate as a potential marker for the prediction of long-term outcome in advanced non-small cell lung cancer treated with first-line tyrosine kinase inhibitors

Context: Tyrosine kinase inhibitors (TKIs) targeting epidermal growth factor receptor (EGFR) play an indispensable role in the treatment of non-small cell lung cancer (NSCLC), leading to a survival major breakthrough, but there remains no uniform standard for predicting the efficacy of TKI therapy. Aims: We retrospectively reviewed the use of EGFR-TKIs for advanced NSCLC between January 2009 and December 2017 in a hospital, which 169 patients who treated with first-line TKIs were enrolled. Subjects and Methods: Multiple clinical factors, including histology, age, and sex, were analyzed. We calculated the tumor shrinkage rate (TSR) by measuring the longest diameters of the main mass by computed tomography (CT) before TKI therapy and the first CT after TKI therapy. We evaluated overall survival (OS) and progression-free survival (PFS) after first-line TKI therapy, and we assessed factors predicting survival using the Kaplan–Meier method. Results: Eligible patients were sorted into higher (n = 83) and lower (n = 86) TSR groups according to the mean TSR of 0.49%. The 83 patients with a higher TSR had longer PFS and OS than those in the 86 patients with a lower TSR (14.83 vs. 8.40 months, P < 0.001, and 31.03 vs. 20.10 months, P < 0.001, respectively). Multivariate analyses revealed that TSR was an independent predictor of PFS and OS (PFS hazard ratio [HR]: 0.506, P < 0.001, and OS HR: 0.291, P < 0.001). Conclusions: These cumulative data support that TSR may be an early predictor of the treatment efficacy in NSCLC with EGFR mutations treated with first-line TKIs

Effect of relative humidity on drying characteristic and quality of Panacis Quinquefolii Radix / 中草药

Objective: Taking Panacis Quinquefolii Radix (PQR) as study object, the drying characteristic and quality was investigated under constant relative humidity (RH) and step-down RH drying method in order to provide foundation for improving drying efficient and quality of PQR. Methods: At drying temperature 55 ℃, the effect of constant RH (20%, 30%, and 40%), step-down RH, when RH 40% was kept for 1, 5, and 9 h and then decreased to 20%, and continuously dehumidification drying conditions on drying characteristic, moisture effective diffusion coefficient, rehydration ratio, shrinkage ratio, total ginsenoside content and microstructure were investigated. Results: With constant RH drying condition, the lower the RH was, the higher the drying rate was. When RH was 20%, the drying time was shortened by 6.8% compared with RH of 40%. With step-down RH drying condition, when RH 40% was held for 5 h and then decreased to 20%, the drying time was shortened by 3.4% compared with dehumidification drying method. Also, a transient increasing drying rate phase was appeared. Moisture effective diffusion coefficient ranged from 1.49 × 10-10 to 2.50 × 10-10 m2/s. Rehydration ratio mainly depended on the damage degree of the PQR cellular structure and the moisture content before rehydrating. Additionally, the rehydration ratio and shrinkage ratio increased with the increase of RH. High RH was benefit for reserving and transferring of ginsenoside content. The microstructure results showed that under continuous dehumidification drying process, the PQR surface was crusted so that the drying time was prolonged and rehydration ratio was decreased. On the other hand, step-down RH drying method was benefit for porous structure formation, which was helpful for shortening drying time and improving rehydration ratio. When RH 40% was kept for 5 h and then decreased to 20%, the comprehensive score of this drying condition achieved its maximum value as (0.61 ± 0.01). Such drying condition was regarded as the best drying process with the rehydration ratio, shrinkage ratio and total ginsenoside content of 2.23 ± 0.12, 0.26 ± 0.06, and (5.01 ± 0.04)%, respectively. Conclusion: Step-down RH drying method can improve PQR drying efficient and quality and such conclusion provided theoretical foundation and technical support for how to adjust RH during hot air drying of PQR.

Factors influencing clinical application of bulk-fill composite resin / 华西口腔医学杂志

Bulk-fill composite resin are simple to operate, and they reduce polymerization shrinkage and microleakage compare to traditional resin-based composites. However, their clinical application could be affected by numerous factors, such as the material itself, light curing, placement techniques, storage condition, and preheating. This review aimed to summarize the definitions, classifications, indications, clinical properties, and influencing factors of the clinical application of bulk-fill resin-based composites and discuss the ways to improve their clinical effectiveness.

Brain functional network reconstruction based on compressed sensing and fast iterative shrinkage-thresholding algorithm / 生物医学工程学杂志

The construction of brain functional network based on resting-state functional magnetic resonance imaging (fMRI) is an effective method to reveal the mechanism of human brain operation, but the common brain functional network generally contains a lot of noise, which leads to wrong analysis results. In this paper, the least absolute shrinkage and selection operator (LASSO) model in compressed sensing is used to reconstruct the brain functional network. This model uses the sparsity of

Vacuum therapy prevents corporeal veno-occlusive dysfunction and penile shrinkage in a cavernosal nerve injured rat model / 亚洲男科学杂志(英文版)

Erectile dysfunction and penile shrinkage are the common complications after radical prostatectomy. Penile rehabilitation is widely applied after the surgery. Vacuum therapy is one of the three penile rehabilitation methods used in the clinical setting, but its mechanism is not well known. This study was designed to investigate whether vacuum erectile device (VED) can prevent corporeal veno-occlusive dysfunction and penile shrinkage in the bilateral cavernous nerve crush (BCNC) rat model. Adult male Sprague-Dawley rats were randomly assigned into three groups: sham group, BCNC group, and BCNC + VED group. After 4 weeks, penile length and intracavernosal pressure (ICP) were measured, and then the middle part of the penis was harvested after dynamic infusion cavernosometry to complete the following items: smooth muscle/collagen ratios and collagen I/III ratios; ultramicrostructure of the tunica albuginea, endothelial cell, and smooth muscle cell; and the expression of calponin-1 and osteopontin. The penile shortening, peak ICP and ICP drop rate after alprostadil injection were significantly improved with vacuum therapy after 4-week treatment. Compared with BCNC group, VED significantly increased smooth muscle/collagen ratios, decreased collagen I/III ratios, and preserved the ultramicrostructure of the tunica albuginea, endothelial cell, and smooth muscle cell. The data also showed that animals exposed to VED could partially reverse the expression of calponin-1 and osteopontin induced by BCNC. In conclusion, vacuum therapy is effective to prevent penile shrinkage and veno-occlusive dysfunction in penile rehabilitation, which may be associated with well-preserved structure and function of the tunica albuginea, endothelial cell, and smooth muscle cell.

Influence of modulated photo-activation on shrinkage stress and degree of conversion of bulk-fill composites

Abstract This study aimed to evaluate the polymerization properties of bulk-fill materials (low and high-viscosity) by using high-intensity continuous light and intermittent photo-activation in terms of polymerization shrinkage stress and degree of conversion (DC). The following Bulk-fill and Conventional nanofilled resin composites were evaluated: Filtek Z350XT Flow (3M/ESPE), SureFil SDR Flow (Dentsply), Filtek Bulk Fill Flow (3M/ESPE), Filtek Z350XT (3M/ESPE) and Filtek Bulk Fill Posterior (3M/ESPE). A LED device (DB 685, Dabi Atlante) was used for both protocols: continuous uniform and intermittent photo-activation (light-on and light-off cycles) with identical radiant exposure (14 J/cm2). The polymerization shrinkage stress (n=6) was evaluated by inserting a single increment of 12 mm3 between two stainless steel plates (6×2 mm) adapted to a Universal Testing Machine (UTM), at different times. Measurements were recorded after photo-activation. The degree of conversion was evaluated by Fourier transformed infrared spectroscope (FTIR) with an attenuated total reflectance (ATR) accessory (n=5). Data were analyzed by three-way ANOVA and Tukey's HSD (α=0.05) tests. Bulk Fill Posterior presented higher shrinkage stress values when photo-activated with the intermittent technique (p<0.05). The intermittent photo-activation increased the degree of conversion for the low-viscosity bulk-fills (p<0.05). Therefore, the use of modulated photo-activation (intermittent) must be indicated with caution since its use can influence the shrinkage stress and degree of conversion of composites, which varies according to the resin formulations.

Resumo O presente estudo teve como objetivo avaliar as propriedades de polimerização de materiais bulk-fill (baixa e alta viscosidade) utilizando luz contínua de alta intensidade e fotoativação intermitente em relação ao estresse de contração de polimerização e grau de conversão (DC). As seguintes resinas compostas Bulk-fill e nanohíbridas convencionais foram avaliadas: Filtek Z350XT Flow (3M/ESPE), SureFil SDR Flow (Dentsply), Filtek Bulk Fill Flow (3M/ESPE), Filtek Z350XT (3M/ESPE) e Filtek Bulk Fill Posterior (3M/ESPE). Um dispositivo de LED (DB 685, Dabi Atlante) foi utilizado nos dois protocolos: fotoativação contínua e intermitente contínua (ciclos de liga e desliga) com exposição idêntica (14 J/cm2). A tensão de contração de polimerização (n=6) foi avaliada através da inserção de um incremento único de 12 mm3 entre duas placas de aço inoxidável (6×2 mm) adaptadas a uma Máquina de Ensaio Universal (UTM), em tempos diferentes. As medições foram registradas após a fotoativação. O grau de conversão foi avaliado por FTIR-ATR (n=5). Os dados foram analisados ​​pelos testes ANOVA a três fatores e teste de Tukey (α=0,05). A resina Bulk Fill Posterior apresentou maiores valores de tensão de contração quando fotoativadas com a técnica intermitente (p<0,05). A fotoativação intermitente aumentou o grau de conversão nas resinas bulk-fill de baixa viscosidade (p<0,05). Portanto, o uso de fotoativação modulada (intermitente) deve ser indicado com cautela, uma vez que seu uso pode influenciar a tensão de contração e o grau de conversão dos compósitos, o que varia de acordo com as formulações da resina.

Microleakage in posterior teeth with different materials and different types of cavities

Background: The purpose of this study was to investigate the behavior of a resin-based 2,2-bis (p-[2′-hydroxy-3′-methacryloxypropoxy] phenylene) propane and a composite resin modified with oxirane, regarding the ability of marginal sealing, both with direct restorations and indirect restorations. Materials and Methods: To achieve this, mesio- and disto-occlusal cavities were made on the same tooth, totalling 100 cavities. These cavities were restored with two materials, Filtek P90 (3M ESPE) and Opallis (FGM). Then, they were divided into two groups: Fifty direct restorations, each sample restored with the two materials, following the manufacturer's protocol and fifty indirect restorations, and then cemented with a paste obtained by diluting the resin in its adhesive. The templates were thermally cycled, 30 s at 5°C and 30 s at 55°C for 500 cycles and then were immersed in methylene blue for 24 h. Afterward, they were trimmed using a plaster trimmer from occlusal toward a gingival direction. These samples were analyzed with stereomicroscope (×3) by two blinded observers. Then, a system which considers the average number of surrounding walls that have suffered infiltration on a scale of 0–3 was used. Results: Data were subjected to statistical analysis (Mann–Whitney and Kruskal–Wallis tests) with a significance level of 5% maximum. Conclusion: It was concluded that the indirect restorations showed the greatest number of restorations with score 0 and 1 (34) and lowest score 2 and 3 (16). This suggests that indirect restorations regardless of the material used behaved more effectively regarding the marginal sealing of restorations.